Gallery

Project Description

This pair of brass and glass bistro shelves got custom made saddles to spread the support for the glass shelves. The space was too narrow for three legs, but two wide for two legs at ends only.

Project Description

This floor to ceiling shelving unit has four wooden shelves threaded over steel tubes. The wood has routed half pockets for stainless steel support bars.

Project Description

Batch of 3 corten planters for a private home. They have a raised floor and drain holes, so the plants do not drown.

Project Description

A custom-made brass cabinet base for Allie Wood Design Studio.

Project Description

A custom-made stainless steel hanging bar shelf for Allie Wood Design Studio – West University Project.

Project Description

A custom-made taff and brass wood shelf for a project with Bankston May Associates interior design.

Project Description

Custom i-beam inspired feature shelf and cabinet created with steel, aluminum, brass, and glass for a home with exposed i-beams.

Project Description

Custom-made brass and glass bistro shelves for a home remodeling project with Evermon Homes LLC.

Project Description

A custom-made steel and brass two-sided shelf and room divider. It is mounted floor to ceiling. This piece offers an elegant industrial look that blends seamlessly with both modern and rustic décor.

Project Description

Project Description

Project Description

A custom-made feature brass wine rack designed by the talented Aaron Mendiaz of Studio Borunda, for a stunning project with Penberthy Custom Builders and Dream Makers.

It’s always a privilege to collaborate with visionary designers and builders to create one-of-a-kind pieces.

Project Description

Project Description

Custom wall-mounted brass and glass shelves for a private homeowner.

Project Description

Custom fitted brass and glass bar shelf in private home.

Project Description

Project Description

Custom wall mounted brass and glass shelves for kitchen of private home.

Project Description

A custom bathroom brass and glass shelf designed and fabricated for a private home.

Project Description

Fitted living room brass and glass shelves designed and fabricated for a private home.

Project Description

This is a 3 part metal sign that is powder coated and layered on top of each other to create this unique 3 dimensional design, and hangs on a wall behind a receptionist desk. This particular design is roughly 3.5 feet tall and 1.5 feet wide.

Project Description

We fabricated the 98″ x 47″ custom table base out of carbon steel to hold a 3 cm marble tabletop for a project with La Dolce Casa Designs. The table base itself weighed approximately 100 lbs., but is rated to hold up to 1000 lbs. for the tabletop.

Project Description

Constructed from steel with adjustable feet, and powder coated to clients specific request

Project Description

We crafted this 6.25 ft by 6.25 ft custom table base with carbon steel for a project with La Dolce Casa Designs. It weighs approximately 106 lbs.

Project Description

These planters are located on the University Park Campus of Lone Star College and are constructed out of steal.

Project Description

We crafted this 72″ x 18 ” custom sofa table base with steel for a project with La Dolce Casa Designs. It weighs approximately 77 lbs.

Project Description

Project Description

We crafted these blackened steel panels decorations for a project with CPJ Builders. The rich, dark metal finish complements the bright interior, creating a clean and balanced contrast.

Project Description

We created this custom display cabinet for a condominium project with Kristian Bell and KBC Construction. It was installed in a unit at The Greenway Towers Condos.

Project Description

Project Description

Project Description

Project Description

Project Description

We crafted this decorative fireplace surround for Project Longmont with David James Custom Builders. It is a brass bar perimeter with round brass bars across the face and black powder coated aluminum backing. The brass has a sanded finish and cleat with lacquer.

Project Description

This custom brass and glass hanging bar shelf was crafted for project with Buster & Cogdell Builders. It measures 90 1/2 inches in width and 58 inches in height. The brass has a satin finish and clear coat. The glass is tempered with eased edges. The weight of this piece is approximately 170 pounds.

Project Description

We crafted this custom glass table base for a private homeowner. It was made with steel and weighs approximately 73 lbs. without the glass top. The table base was powder coated with Spanish gold color.

Project Description

Artist Anthony Thompson Shumate came to us to produce his project – Monumental Moments. These inspirational phrases are installed in Buffalo Bayou park in Houston, Texas. The four foot tall letters are cut from HDPE. What no one will ever see are the threaded stainless bars and galvanized tubing which lay under ground. This steel structure provides spacing and secure anchoring for the artwork.

Monumental Moments – VERBS

Project Description

Artist Anthony Thompson Shumate came to us to produce his project – Monumental Moments. These inspirational phrases are installed in Buffalo Bayou park in Houston, Texas. The four foot tall letters are cut from HDPE. What no one will ever see are the threaded stainless bars and galvanized tubing which lay under ground. This steel structure provides spacing and secure anchoring for the artwork.

Monumental Moments – VERBS

Project Description

Fountain runnel designed and fabricated for the Memorial City Hotel Zaza. Constructed out of Stainless Steal

Project Description

We crafted this beautiful monolith style rangehood and installed it for a private home in 2021.

Project Description

Project Description

This is an elegant custom monolith-style rangehood that we crafted with steel and brass for a private homeowner in 2021.

Project Description

This is a Juliet rangehood we crafted using stainless steel and brass for a project with Montgomery Roth Architectural & Interior Design.

Project Description

We crafted this luxurious brass Juliet-style rangehood for a private homeowner in 2023. The brass hood is accompanied by a stainless-steel crown, brass facia, and stainless-steel trim. The dimensions of this range hood are 77 3/4″ x 49 3/4″ x 23 1/4″ and weighs approximately 198 lbs.

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

We had the pleasure of designing and fabricating this kitchen vent hood for one of our clients.

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

Bar height, round table top with custom logo created for the Houston Texans lounge bar at NRG stadium.

Project Description

Steel constructed hanging bar shelf with built in wine glass holder on the bottom

Project Description

Made from square tube steel, and finished with a beautiful textured fabric and leather strapping arm rest

Project Description

Project Description

Project Description

Project Description

Project Description

This one of a kind Chandelier was designed and fabricated for a vineyard tasting room in New Ulm, TX. It is constructed from steal and used wine barrels.

Project Description

Project Description

Elegance in Brass and oyster. These chandeliers conceal their wiring so only the crisp lines, clean tubes, and smooth terminals support the frosted white shades. Everything that looks brass is brass. Steel and aluminum were cut and welded then powder coated oyster. This fixture is located at State of Grace Restaurant in Houston, TX.

Project Description

A batch of six matching chandeliers were produced for Spring Cypress Presbyterian Church. They were remodeling their sanctuary and we were privileged to contribute.

The perimeters of the fixtures are cut with the church’s selected design. All parts are aluminum. Parts were water jet cut, slip rolled, welded, milled, and turned at HMW and we handled the outside processing.

Project Description

Twenty four feet long and straight as an arrow. This divider has two continuous lengths of square tubing which fit through square holes milled in the vertical round tubes. This method maintained the straightness and consistency of the height. The glass panels are supported by water jet steel frames. The steel was sanded prior to welding and then cleaned and blackened. Brass accents cap the round tubes and provide fastening at the bases.

Project Description

This all aluminum framework chandelier has an umbrella profile with six perimeter light extensions and one central light extension. On this example the shades were chosen to match the main kitchen chandelier. The six perimeter shades are smaller in size and the one central shade is larger than the other six. The aluminum terminals, tubes, and main wiring bowl were anodized to match the kitchen hardware and the body was powder coated to match the cabinet paint.

Project Description

A batch of nine light fixtures. The two layered backing plate is water jet from steel and the pieces welded with tubing between them. The plate has a pocket in the back which conceals the electrical box. All of the steel was cleaned and blackened. From the end of the brass tubing extends a chain with an assembled brass chandelier supporting six lights each. The power wire passes through the back plate, brass tube, is woven through the chain, and enters the hanging fixture. These fixtures are located at State of Grace Restaurant in Houston, TX.

Project Description

This counter surface is yellow brass. The edge was formed by hand hammering. Subtle distressing and hammer marks are visible on the front face. The surface was left un-coated so that with time it will age, and with aggressive cleaning it can be lightened.

Project Description

These are the foot rails and stands at the main bar, chef’s kitchen bar, and oyster bar. The base was water jet from 1/4″ thick steel and TIG welded. Then the brass rings were brazed to to the stand. Once assembled the steel was blackened then the brass was cleaned. The tubes are blackened steel.

Project Description

The oyster bar at the State of Grace restaurant in River Oaks, Houston was made by HMW. It took a combination of technology and hand working to produce this. The customer provided us with a digital design of the shape of the bar. Cutting that from a file would get us templates, but those templates needed trimming and fitting to match the actual structure in place. Once the templates were correct, we began to cut and hammer the brass over them. This is a time consuming process that is best not to be rushed. Like the main surface, the transaction counter was also hand hammered. Other trades trimmed out the main bar with a wooden elbow rest.

Project Description

Custom Staircase railing that was hand bent and each piece set in place.

Project Description

The lobby bar of the Hotel Galvez is easily accessible after hours. Prior to construction of this cage, all of the alcohol had to be secured each night and returned to the bar each day. This cage is both attractive and functional. The panels have locks on the bottom that all share one key. Each panel weighs less than ten pounds and can be stored efficiently on a rack in the closet behind the bar. The dismantling of this cage takes less than five minutes each time. A great improvement over the time it takes to collect 75 bottles of liquor.

Nearby cabinet doors received matching cutout panels.

Project Description

This eight foot long island base features blackened steel panels, tube steel frame and exposed rivets. The back side as an eight inch deep storage area for hanging pans behind the four matching doors. The front side has pockets for an ice machine and a dish washer.

Project Description

Tube steel construction with Spanish pattern doors cut on site. The central cabinet is separated from the side shelves with carbon steel sheets. Built to match the space.

Project Description

All steel kitchen cabinet with frosted glass accents. All welds ground and panels clear coated after production. Multiple sizes of spice shelves span the full height of the doors. The main interior shelves are galvanized steel and adjustable in height. The hidden feet are adjustable for leveling

Project Description

All steel construction for residential vent hood. The materials match cabinets and shelves we made for the rest of this home.

Project Description

Stainless steel decoration for the front of a kitchen island. Mill finish stainless steel tubes over sanded stainless steel sheet. The customer’s carpenter delivered the raw wood island piece to us and we applied our metalwork to the front side then returned it to the site for the carpenter to finish the piece.

Project Description

The anchor design on the doors and the steel tube frames were provided by artist Gary Sweeney. In order to weld them into their spaces and not have unsightly gaps each panel needed to fit snugly. All three doors were meticulously measured and individual panels were cut which conform to the subtly unique dimensions of each space.  Once welded the doors were sent out for powder coating. The last step was attaching the perforated stainless steel screens to the back side of the designs.

Project Description

Anthony Thompson Shumate of ACTS Studios designed the bicycle racks for the Greater East End Management District. HMW cut them from 7/8 inch thick plate steel and had them hot dip galvanized. Some were cut with extensions that are sunk into the concrete pad they sit on. Some have feet welded to the bottom of them and they are bolted on top of their concrete pads.

Project Description

Artist Gary Sweeney provided the artwork and design for 28 road dividers. We cut and welded the square tube steel frames around water jet artwork. The finished weldments were powder coated. Installation was handled by the Greater East End Management District. Five of them are unique designs and are eleven feet long. The remaining 23 are four designs repeated which are each seven feet long.

Project Description

Artist Anthony Thompson Shumate came to us to produce his project – Monumental Moments. These inspirational phrases are installed in Buffalo Bayou park in Houston, Texas. The four foot tall letters are cut from HDPE. What no one will ever see are the threaded stainless bars and galvanized tubing which lay under ground. This steel structure provides spacing and secure anchoring for the artwork.

Monumental Moments – VERBS

Project Description

These decorative archways were designed by artist Gary Sweeney and produced by HMW. They delineate the two ends of the Esplanade at Navigation Boulevard in Houston. Each is all steel and roughly 15 feet tall and 15 feet wide. The artwork was provided to HCMW and then cut out of three sheets of steel which when laid next to each other fit seamlessly. The sheets were welded at the joints and then welded to a 2″ square tube frame. The entire assembly was powder coated prior to delivery. Installation was handled by the on site contractors.

Project Description

The church provided us with the artwork for their cross design. We water jet cut steel to match each piece of their cross, welded brackets to the back of them, and had them powder coated.

Project Description

We produced 18 of these road dividers for Houston Metro. The magnolia design is cast into the concrete supports for the overpass as well.

Project Description

Custom brass counter tops were added to the kitchen design of the BOHO Cottage at the world famous Vintage Round Top. Also featured on Emily Henderson’s Interior Design Blog of HGTV. Photography by Tessa Neustadt.

Project Description

The smooth concrete top is embellished with a brass flower. The legs are water jet from 3/8 inch thick aluminum and welded to the top support. The base is powder coated teal.

Project Description

This table mimics elegant console tables more commonly made from wood. The contours are inspired by Victorian designs; most noticeably in the legs. The table is all aluminum. Prior to welding each piece is sanded to produce a shiny metallic surface. After welding the whole table was powder coated clear to show off the natural color. The designs in the top are cut all the way through the Aluminum.

This design can be powder coated solid colors as well.

Project Description

Wooden top harvested from drought killed oak in Austin County. The base is sanded and clear coated steel. Modern design.

Project Description

Table base made from stainless steel. The tubes were rolled and the plate water jet in house before TIG welding. Sanded finish on all pieces.

Project Description

Quick Trick Tube Stack. This table uses something as strong as pipe in a non-traditional manner and then gives it an industrial finish for artistic sake. The pipes are cut and welded to a steel back bone and the pieces are then hot dip galvanized. The zinc coating is not uniform in color or pattern.

Project Description

This conference sized table is both artistic and industrial. Steel pipe provides strength and subtle arcs show elegance. Minimizing the supports leaves clear space. Within the framework.

Project Description

All steel bases cut from plate steel and rectangular tubing. The steel was cleaned before and after welding and then blackened. One pair was made.

Project Description

This pair of bases stand 23 inches tall. The design is cut from steel and fanned out to reveal the shape of a pineapple. The steel was sand blasted and clear powder coated. Direct light shows a subtle metallic sparkle.

These can be powder coated most colors.

Project Description

Cascading layers of aluminum form the top of this drinks ready coffee table. The lower ring emulate the clover shaped top. Powder coated satin black the top has a painted gold middle ring.

20″ tall x 36″ wide x 18″ deep.

Project Description

This table was built to display a deep sea hose at OTC. The customer’s name and parent company logo are cut into the base. It is made from 1/2″ thick steel and fully welded at all joints. Originally the customer wanted a plain, square tube steel table. I designed this and presented it as a more artistic option.