Gallery

Project Description

This pair of brass and glass bistro shelves got custom made saddles to spread the support for the glass shelves. The space was too narrow for three legs, but two wide for two legs at ends only.

Project Description

This floor to ceiling shelving unit has four wooden shelves threaded over steel tubes. The wood has routed half pockets for stainless steel support bars.

Project Description

A custom-made brass cabinet base for Allie Wood Design Studio.

Project Description

A custom-made stainless steel hanging bar shelf for Allie Wood Design Studio – West University Project.

Project Description

A custom-made taff and brass wood shelf for a project with Bankston May Associates interior design.

Project Description

Custom i-beam inspired feature shelf and cabinet created with steel, aluminum, brass, and glass for a home with exposed i-beams.

Project Description

Custom-made brass and glass bistro shelves for a home remodeling project with Evermon Homes LLC.

Project Description

A custom-made steel and brass two-sided shelf and room divider. It is mounted floor to ceiling. This piece offers an elegant industrial look that blends seamlessly with both modern and rustic décor.

Project Description

Project Description

Project Description

A custom-made feature brass wine rack designed by the talented Aaron Mendiaz of Studio Borunda, for a stunning project with Penberthy Custom Builders and Dream Makers.

It’s always a privilege to collaborate with visionary designers and builders to create one-of-a-kind pieces.

Project Description

Project Description

Custom wall-mounted brass and glass shelves for a private homeowner.

Project Description

Custom fitted brass and glass bar shelf in private home.

Project Description

Project Description

Custom wall mounted brass and glass shelves for kitchen of private home.

Project Description

A custom bathroom brass and glass shelf designed and fabricated for a private home.

Project Description

Fitted living room brass and glass shelves designed and fabricated for a private home.

Project Description

We fabricated the 98″ x 47″ custom table base out of carbon steel to hold a 3 cm marble tabletop for a project with La Dolce Casa Designs. The table base itself weighed approximately 100 lbs., but is rated to hold up to 1000 lbs. for the tabletop.

Project Description

Constructed from steel with adjustable feet, and powder coated to clients specific request

Project Description

We crafted this 6.25 ft by 6.25 ft custom table base with carbon steel for a project with La Dolce Casa Designs. It weighs approximately 106 lbs.

Project Description

We crafted this 72″ x 18 ” custom sofa table base with steel for a project with La Dolce Casa Designs. It weighs approximately 77 lbs.

Project Description

We crafted these blackened steel panels decorations for a project with CPJ Builders. The rich, dark metal finish complements the bright interior, creating a clean and balanced contrast.

Project Description

We created this custom display cabinet for a condominium project with Kristian Bell and KBC Construction. It was installed in a unit at The Greenway Towers Condos.

Project Description

Project Description

We crafted this decorative fireplace surround for Project Longmont with David James Custom Builders. It is a brass bar perimeter with round brass bars across the face and black powder coated aluminum backing. The brass has a sanded finish and cleat with lacquer.

Project Description

This custom brass and glass hanging bar shelf was crafted for project with Buster & Cogdell Builders. It measures 90 1/2 inches in width and 58 inches in height. The brass has a satin finish and clear coat. The glass is tempered with eased edges. The weight of this piece is approximately 170 pounds.

Project Description

We crafted this custom glass table base for a private homeowner. It was made with steel and weighs approximately 73 lbs. without the glass top. The table base was powder coated with Spanish gold color.

Project Description

We crafted this beautiful monolith style rangehood and installed it for a private home in 2021.

Project Description

This is an elegant custom monolith-style rangehood that we crafted with steel and brass for a private homeowner in 2021.

Project Description

This is a Juliet rangehood we crafted using stainless steel and brass for a project with Montgomery Roth Architectural & Interior Design.

Project Description

We crafted this luxurious brass Juliet-style rangehood for a private homeowner in 2023. The brass hood is accompanied by a stainless-steel crown, brass facia, and stainless-steel trim. The dimensions of this range hood are 77 3/4″ x 49 3/4″ x 23 1/4″ and weighs approximately 198 lbs.

Project Description

Project Description

Project Description

Project Description

We had the pleasure of designing and fabricating this kitchen vent hood for one of our clients.

Project Description

Project Description

Project Description

Project Description

Project Description

Bar height, round table top with custom logo created for the Houston Texans lounge bar at NRG stadium.

Project Description

Steel constructed hanging bar shelf with built in wine glass holder on the bottom

Project Description

Made from square tube steel, and finished with a beautiful textured fabric and leather strapping arm rest

Project Description

Project Description

Project Description

Project Description

Project Description

Project Description

This all aluminum framework chandelier has an umbrella profile with six perimeter light extensions and one central light extension. On this example the shades were chosen to match the main kitchen chandelier. The six perimeter shades are smaller in size and the one central shade is larger than the other six. The aluminum terminals, tubes, and main wiring bowl were anodized to match the kitchen hardware and the body was powder coated to match the cabinet paint.

Project Description

This counter surface is yellow brass. The edge was formed by hand hammering. Subtle distressing and hammer marks are visible on the front face. The surface was left un-coated so that with time it will age, and with aggressive cleaning it can be lightened.

Project Description

Custom Staircase railing that was hand bent and each piece set in place.

Project Description

This eight foot long island base features blackened steel panels, tube steel frame and exposed rivets. The back side as an eight inch deep storage area for hanging pans behind the four matching doors. The front side has pockets for an ice machine and a dish washer.

Project Description

Tube steel construction with Spanish pattern doors cut on site. The central cabinet is separated from the side shelves with carbon steel sheets. Built to match the space.

Project Description

All steel kitchen cabinet with frosted glass accents. All welds ground and panels clear coated after production. Multiple sizes of spice shelves span the full height of the doors. The main interior shelves are galvanized steel and adjustable in height. The hidden feet are adjustable for leveling

Project Description

All steel construction for residential vent hood. The materials match cabinets and shelves we made for the rest of this home.

Project Description

Stainless steel decoration for the front of a kitchen island. Mill finish stainless steel tubes over sanded stainless steel sheet. The customer’s carpenter delivered the raw wood island piece to us and we applied our metalwork to the front side then returned it to the site for the carpenter to finish the piece.

Project Description

Custom brass counter tops were added to the kitchen design of the BOHO Cottage at the world famous Vintage Round Top. Also featured on Emily Henderson’s Interior Design Blog of HGTV. Photography by Tessa Neustadt.

Project Description

The smooth concrete top is embellished with a brass flower. The legs are water jet from 3/8 inch thick aluminum and welded to the top support. The base is powder coated teal.

Project Description

This table mimics elegant console tables more commonly made from wood. The contours are inspired by Victorian designs; most noticeably in the legs. The table is all aluminum. Prior to welding each piece is sanded to produce a shiny metallic surface. After welding the whole table was powder coated clear to show off the natural color. The designs in the top are cut all the way through the Aluminum.

This design can be powder coated solid colors as well.

Project Description

Wooden top harvested from drought killed oak in Austin County. The base is sanded and clear coated steel. Modern design.

Project Description

Table base made from stainless steel. The tubes were rolled and the plate water jet in house before TIG welding. Sanded finish on all pieces.

Project Description

Quick Trick Tube Stack. This table uses something as strong as pipe in a non-traditional manner and then gives it an industrial finish for artistic sake. The pipes are cut and welded to a steel back bone and the pieces are then hot dip galvanized. The zinc coating is not uniform in color or pattern.

Project Description

This conference sized table is both artistic and industrial. Steel pipe provides strength and subtle arcs show elegance. Minimizing the supports leaves clear space. Within the framework.

Project Description

This pair of bases stand 23 inches tall. The design is cut from steel and fanned out to reveal the shape of a pineapple. The steel was sand blasted and clear powder coated. Direct light shows a subtle metallic sparkle.

These can be powder coated most colors.

Project Description

Cascading layers of aluminum form the top of this drinks ready coffee table. The lower ring emulate the clover shaped top. Powder coated satin black the top has a painted gold middle ring.

20″ tall x 36″ wide x 18″ deep.